Technische Spezifikationen
SPL
109 dB
Verstärkerleistung
150 W Treble (Class D) + 150 W Bass (Class D)
Frequenzgang
43 Hz - 20 kHz ("-6 dB")
Genauigkeit des Frequenzgangs
± 1.5 dB (50 Hz - 20 kHz)
Treiberabmessungen
⌀ 165 mm Bass + ⌀ 19 mm Treble (Anzeige in Inch)
Abmessungen
H 999 x W 237 x D 220 mm, (Anzeige in Inch)
Gewicht
14.9 kg / 32.8 lb
Anschlüsse
1 x XLR Analog Input
1 x XLR AES/EBU Input
1 x XLR AES/EBU Output
2 x RJ45 Control
6040R Product Specifications
Smart Active Lautsprecher
Technische Spezifikationen
Der 6040R vereint das Beste aus finnischer Technologie und Design und bietet allen Liebhabern hochwertiger Audioqualität eine außergewöhnliche Leistung und eine wunderschöne Ästhetik.
Systemspezifikationen
Frequenzgang
50 Hz - 20 kHz (± 1.5 dB)
Low cutoff -6dB
43 Hz
High cutoff -6dB
20 kHz
SPL
Peak SPL Maximum peak acoustic output per pair in a listening room with music material at 1 m.
≥118 dB
Kurzzeitiger max. SPL Maximum short term sine wave acoustic output on axis in half space, averaged from 100 Hz to 3 kHz at 1 m.
≥109 dB
Max. Langzeit-SPL Maximum long term RMS acoustic output in the same conditions with IEC weighted noise (limited by driver protection circuit) at 1 m.
≥98 dB
Eigenrauschen
Eigenrauschen Self generated noise level in free space at 1 m on axis (A-weighted).
≤5 dB SPL
Gewicht
Gewicht14.9 kg (32.8 lb)
Abmessungen
Höhe
999 mm
Breite
237 mm
Tiefe
220 mm
Gehäuse
Gehäusematerial
Die cast aluminium
Gehäusetyp
Sealed box
Treiber
Treiber-Typ
Cone
Magnetically shielded bass driver.
Durchmesser
165 mm
Treiber-Typ
Metal dome
Magnetically shielded treble driver.
Durchmesser
19 mm
Richtwirkung
Harmonische Verzerrung
Gruppen-Laufzeit
The latency at high frequencies from the input to the acoustic output, measured in the analog input:
Extended Phase Linearity in GLM set to OFF
2.9 ms
In Genelec performance graphics, the time of converting the from an electronic input signal to the acoustic output in a Genelec monitor is described by two factors – latency and group delay. The group delay factor can be read in the graphics for a specific frequency. The total frequency-specific input-to-output delay is a sum of the latency and group delay factors. To understand the significance of this total delay, consider that moving a loudspeaker away by 1 meter creates an additional delay of about 3 ms.
Abschnitt Verstärker
Verstärker
150 W Class D
150 W Class D
Netzspannung
100-240 VAC 50/60Hz
Stromverbrauch
ISS aktiv
≤1 W
Leerlauf
≤12 W
Volle Leistung
180 W
Abschnitt Signalverarbeitung
Anschlüsse
Input Analog signal input connector XLR female, balanced 10 kOhm.
Input Digital signal input connector XLR female 110 Ohm.
Output Digital signal output / Thru connector XLR male 110 Ohm.
2 x Control Two CAT5 (RJ45) GLM Network connectors for computer control using the Genelec Loudspeaker Manager (GLM) software.