Technische Spezifikationen
SPL
104 dB
Verstärkerleistung
50 W Bass (Class D) + 50 W Treble (Class D)
Frequenzgang
45 Hz - 23 kHz ("-6 dB")
Genauigkeit des Frequenzgangs
± 1.5 dB (58 Hz - 20 kHz)
Treiberabmessungen
⌀ 130 mm Bass + ⌀ 19 mm Treble (Anzeige in Inch)
Abmessungen
H 299 x W 189 x D 178 mm, mit Iso-Pod™ (Anzeige in Inch)
Gewicht
5.1 kg / 11.2 lb
Anschlüsse
1 x XLR Analog Input
1 x XLR AES/EBU Input
1 x XLR AES/EBU Output
2 x RJ45 Control
8330A
SAM™ Studiomonitor
Technische Spezifikationen
Der 8330A kombiniert Präzision, Anpassungsfähigkeit und kompakte Abmessungen. Er bietet eine verfärbungsfreie Wiedergabe und leistungsstarke Funktionen zur Raumanpassung.
Systemspezifikationen
Frequenzgang
58 Hz - 20 kHz (± 1.5 dB)
Low cutoff -6dB
45 Hz
High cutoff -6dB
23 kHz
SPL
Peak SPL Maximum peak acoustic output per pair at 1 m distance with music material.
≥110 dB
Kurzzeitiger max. SPL Maximum short term sine wave acoustic output on axis in half space, averaged from 100 Hz to 3 kHz at 1 m.
≥104 dB
Max. Langzeit-SPL Maximum long term RMS acoustic output in the same conditions with IEC weighted noise (limited by driver unit protection circuit) at 1 m.
≥96 dB
Eigenrauschen
Eigenrauschen Self generated noise level in free field on axis (A-weighted).
≤5 dB SPL
Gewicht
Gewicht5.1 kg (11.2 lb)
Abmessungen
Höhe
285 mm
Höhe mit Iso-Pod
299 mm
Breite
189 mm
Tiefe
178 mm
Gehäuse
Gehäusematerial
Die cast aluminium
Gehäusetyp
Reflex port
Treiber
Treiber-Typ
Cone
Durchmesser
130 mm
Treiber-Typ
Metal dome
Durchmesser
19 mm
Richtwirkung
Harmonische Verzerrung
> 100 Hz ≤0.5 %
Gruppen-Laufzeit
The latency at high frequencies from the input to the acoustic output, measured in the analog input:
Extended Phase Linearity in GLM set to OFF
2.9 ms
In Genelec performance graphics, the time of converting the from an electronic input signal to the acoustic output in a Genelec monitor is described by two factors – latency and group delay. The group delay factor can be read in the graphics for a specific frequency. The total frequency-specific input-to-output delay is a sum of the latency and group delay factors. To understand the significance of this total delay, consider that moving a loudspeaker away by 1 meter creates an additional delay of about 3 ms.
Abschnitt Verstärker
Verstärker
50 W Class D
50 W Class D
Netzspannung
100-240 VAC 50/60Hz
Stromverbrauch
ISS aktiv
≤0.5 W
Leerlauf
≤3 W
Volle Leistung
50 W
Abschnitt Signalverarbeitung
Anschlüsse
Input Analog signal input connector XLR female, balanced 10 kOhm.
Input XLR female IN
Output XLR male OUT
2 x Control Two CAT5 (RJ45) GLM Network connectors for computer control using the Genelec Loudspeaker Manager (GLM) software.