Technische Spezifikationen
SPL
112 dB
Verstärkerleistung
200 W Bass (Class D) + 150 W Treble (Class D)
Frequenzgang
33 Hz - 22 kHz ("-6 dB")
Genauigkeit des Frequenzgangs
± 1.5 dB (38 Hz - 20 kHz)
Treiberabmessungen
⌀ 205 mm Bass + ⌀ 25 mm Treble (Anzeige in Inch)
Abmessungen
H 452 x W 286 x D 278 mm, mit Iso-Pod™ (Anzeige in Inch)
Gewicht
12.8 kg / 28.2 lb
Anschlüsse
1 x XLR Analog Input
1 x XLR AES/EBU Input
1 x XLR AES/EBU Output
2 x RJ45 Control
8350A
SAM™ Studiomonitor
Technische Spezifikationen
Die gesamte Intelligenz von Smart Active Monitoring in einem extrem leistungsstarken Nahfeldmonitor. Dürfen wir vorstellen? Der Genelec 8350A.
Systemspezifikationen
Frequenzgang
38 Hz - 20 kHz (± 1.5 dB)
Low cutoff -6dB
33 Hz
High cutoff -6dB
22 kHz
SPL
Peak SPL Maximum peak acoustic output per pair in a listening room with music material at 1 m.
≥121 dB
Kurzzeitiger max. SPL Maximum short term sine wave acoustic output on axis in half space, averaged from 100 Hz to 3 kHz at 1 m.
≥112 dB
Max. Langzeit-SPL Maximum long term RMS acoustic output in the same conditions with IEC weighted noise (limited by driver unit protection circuit) at 1 m.
≥103 dB
Eigenrauschen
Eigenrauschen Self generated noise level in free field on axis (A-weighted).
≤5 dB SPL
Gewicht
Gewicht12.8 kg (28.2 lb)
Abmessungen
Höhe
433 mm
Höhe mit Iso-Pod
452 mm
Breite
286 mm
Tiefe
278 mm
Gehäuse
Gehäusematerial
Die cast aluminium
Gehäusetyp
Reflex port
Treiber
Treiber-Typ
Cone
Durchmesser
205 mm
Treiber-Typ
Metal dome
Durchmesser
25 mm
Richtwirkung
Harmonische Verzerrung
> 100 Hz ≤0.5 %
Gruppen-Laufzeit
The latency at high frequencies from the input to the acoustic output, measured in the analog input:
Extended Phase Linearity in GLM set to OFF
3.0 ms
In Genelec performance graphics, the time of converting the from an electronic input signal to the acoustic output in a Genelec monitor is described by two factors – latency and group delay. The group delay factor can be read in the graphics for a specific frequency. The total frequency-specific input-to-output delay is a sum of the latency and group delay factors. To understand the significance of this total delay, consider that moving a loudspeaker away by 1 meter creates an additional delay of about 3 ms.
Abschnitt Verstärker
Verstärker
200 W Class D
150 W Class D
Netzspannung
100-240 VAC 50/60Hz
Stromverbrauch
ISS aktiv
≤1 W
Leerlauf
≤12 W
Volle Leistung
230 W
Abschnitt Signalverarbeitung
Anschlüsse
Input Analog signal input connector XLR female, balanced 10 kOhm.
Input Digital signal input connector XLR female 110 Ohm.
Output Digital signal output / Thru connector XLR male 110 Ohm.
2 x Control Two CAT5 (RJ45) GLM Network connectors for computer control using the Genelec Loudspeaker Manager (GLM) software.