Technische Spezifikationen
SPL
104 dB
Verstärkerleistung
72 W Bass (Class D) + 36 W Midrange (Class D) + 36 W Treble (Class D)
Frequenzgang
45 Hz - 37 kHz ("-6 dB")
Genauigkeit des Frequenzgangs
± 1.5 dB (58 Hz - 20 kHz)
Treiberabmessungen
2 x H 65 x W 130 mm Bass + ⌀ 90 mm Midrange + ⌀ 19 mm Treble (Anzeige in Inch)
Abmessungen
H 305 x W 189 x D 212 mm, mit Iso-Pod™ (Anzeige in Inch)
Gewicht
6.7 kg / 14.8 lb
Anschlüsse
1 x XLR Analog Input
1 x XLR AES/EBU Input
1 x XLR AES/EBU Output
2 x RJ45 Control
8331A SAM™ Studio Monitor
SAM™ Studiomonitor
Technische Spezifikationen
Unglaublicher 3-Wege Punktschallquellen-Studiomonitor mit dem Platzbedarf eines kompakten 2-Wege Monitors. Wenn es auf geringe Abmessungen und Präzision ankommt, gibt es nichts Vergleichbares.
Systemspezifikationen
Frequenzgang
58 Hz - 20 kHz (± 1.5 dB)
Low cutoff -6dB
45 Hz
High cutoff -6dB
37 kHz
SPL
Peak SPL
≥110 dB
Maximum peak acoustic output per pair in a listening room with music material at 1 m.
Kurzzeitiger max. SPL
≥104 dB
Maximum short term sine wave acoustic output on axis in half space, averaged from 100 Hz to 3 kHz at 1 m.
Max. Langzeit-SPL
≥99 dB
Maximum long term RMS acoustic output in the same conditions with IEC weighted noise (limited by driver protection circuit) at 1 m.
Eigenrauschen
Eigenrauschen
≤0 dB SPL
Self generated noise level in free space at 1 m on axis (A-weighted).
Gewicht
Gewicht6.7 kg (14.8 lb)
Abmessungen
Höhe
285 mm
(11 1/4 in)
Höhe mit Iso-Pod
305 mm
(12 in)
Breite
189 mm
(7 1/2 in)
Tiefe
212 mm
(8 3/8 in)
Gehäuse
Gehäusematerial
Die cast aluminium
Gehäusetyp
Reflex port
Treiber
Treiber-Typ
Racetrack
8331A Bass Driver
Anzahl
2
Breite
130 mm
(5 1/8 in)
Höhe
65 mm
(2 1/2 in)
Treiber-Typ
Coaxial
8331A midrange driver in cone (coaxial)
Durchmesser
90 mm
(3 1/2 in)
Treiber-Typ
Coaxial
8331A treble driver in metal dome (coaxial)
Durchmesser
19 mm
(3/4 in)
Richtwirkung
Harmonische Verzerrung
> 100 Hz ≤0.5 %
Gruppen-Laufzeit
The latency at high frequencies from the input to the acoustic output, measured in the analog input:
Extended Phase Linearity in GLM set to OFF (top graph)
3.2 ms
Extended Phase Linearity in GLM set to ON (bottom graph)
6.9 ms
In Genelec performance graphics, the time of converting the from an electronic input signal to the acoustic output in a Genelec monitor is described by two factors – latency and group delay. The group delay factor can be read in the graphics for a specific frequency. The total frequency-specific input-to-output delay is a sum of the latency and group delay factors. To understand the significance of this total delay, consider that moving a loudspeaker away by 1 meter creates an additional delay of about 3 ms.
Abschnitt Verstärker
Verstärker
72 W Class D
36 W Class D
36 W Class D
Netzspannung
100-240 VAC 50/60Hz
Stromverbrauch
ISS aktiv
≤0.5 W
Leerlauf
≤4 W
Volle Leistung
60 W
Abschnitt Signalverarbeitung
Anschlüsse
Input
Analog signal input connector XLR female, balanced 10 kOhm.
Input
Digital signal input connector XLR female 110 Ohm.
Output
Digital signal output / Thru connector XLR male 110 Ohm.
2 x Control
Two CAT5 (RJ45) GLM Network connectors for computer control using the Genelec Loudspeaker Manager (GLM) software.
Crossover
Bass/Mid
500 Hz
Mid/Treble
3000 Hz