Technische Spezifikationen
SPL
110 dB
Verstärkerleistung
250 W Bass (Class D) + 150 W Midrange (Class D) + 150 W Treble (Class D)
Frequenzgang
38 Hz - 37 kHz ("-6 dB")
Genauigkeit des Frequenzgangs
± 1.5 dB (45 Hz - 20 kHz)
Treiberabmessungen
2 x H 90 x W 170 mm Bass + ⌀ 90 mm Midrange + ⌀ 19 mm Treble (Anzeige in Inch)
Abmessungen
H 370 x W 237 x D 243 mm, mit Iso-Pod™ (Anzeige in Inch)
Gewicht
9.8 kg / 21.6 lb
Anschlüsse
1 x XLR Analog Input
1 x XLR AES/EBU Input
1 x XLR AES/EBU Output
2 x RJ45 Control
8341A SAM™ Studio Monitor
SAM™ Studiomonitor
Technische Spezifikationen
3-Wege Studiomonitor mit hohem Headroom und unglaublicher Abbildung. Der 8341A ist ein Punktschallquellen-Monitor mit der perfekten Mischung aus Größe und Leistung.
Systemspezifikationen
Frequenzgang
45 Hz - 20 kHz (± 1.5 dB)
Low cutoff -6dB
38 Hz
High cutoff -6dB
37 kHz
SPL
Peak SPL Maximum peak acoustic output per pair in a listening room with music material at 1 m.
≥118 dB
Kurzzeitiger max. SPL Maximum short term sine wave acoustic output on axis in half space, averaged from 100 Hz to 3 kHz at 1 m.
≥110 dB
Max. Langzeit-SPL Maximum long term RMS acoustic output in the same conditions with IEC weighted noise (limited by driver protection circuit) at 1 m.
≥101 dB
Eigenrauschen
Eigenrauschen Self generated noise level in free space at 1 m on axis (A-weighted).
≤3 dB SPL
Gewicht
Gewicht9.8 kg (21.6 lb)
Abmessungen
Höhe
351 mm
Höhe mit Iso-Pod
370 mm
Breite
237 mm
Tiefe
243 mm
Gehäuse
Gehäusematerial
Die cast aluminium
Gehäusetyp
Reflex port
Treiber
Treiber-Typ
Racetrack
8341A bass driver
Anzahl
2
Breite
170 mm
Höhe
90 mm
Treiber-Typ
Coaxial
8341A midrange driver cone (coaxial)
Durchmesser
90 mm
Treiber-Typ
Coaxial
8341A treble driver metal dome (coaxial)
Durchmesser
19 mm
Richtwirkung
Harmonische Verzerrung
> 100 Hz ≤0.5 %
Gruppen-Laufzeit
The latency at high frequencies from the input to the acoustic output, measured in the analog input:
Extended Phase Linearity in GLM set to OFF (top graph)
3.3 ms
Extended Phase Linearity in GLM set to ON (bottom graph)
7.0 ms
In Genelec performance graphics, the time of converting the from an electronic input signal to the acoustic output in a Genelec monitor is described by two factors – latency and group delay. The group delay factor can be read in the graphics for a specific frequency. The total frequency-specific input-to-output delay is a sum of the latency and group delay factors. To understand the significance of this total delay, consider that moving a loudspeaker away by 1 meter creates an additional delay of about 3 ms.
Abschnitt Verstärker
Verstärker
250 W Class D
150 W Class D
150 W Class D
Netzspannung
100-240 VAC 50/60Hz
Stromverbrauch
ISS aktiv
≤0.5 W
Leerlauf
≤16 W
Volle Leistung
250 W
Abschnitt Signalverarbeitung
Anschlüsse
Input Analog signal input connector XLR female, balanced 10 kOhm.
Input Digital signal input connector XLR female 110 Ohm.
Output Digital signal output / Thru connector XLR male 110 Ohm.
2 x Control Two CAT5 (RJ45) GLM Network connectors for computer control using the Genelec Loudspeaker Manager (GLM) software.
Crossover
Bass/Mid
500 Hz
Mid/Treble
3000 Hz