Technische Spezifikationen
SPL
118 dB
Verstärkerleistung
250 W Bass (Class D) + 100 W Treble (Class D)
Frequenzgang
36 Hz - 22 kHz ("-6 dB")
Genauigkeit des Frequenzgangs
± 2 dB (39 Hz - 19 kHz)
Treiberabmessungen
⌀ 250 mm Bass + ⌀ 25 mm Treble (Anzeige in Inch)
Abmessungen
H 530 x W 360 x D 360 mm, mit Iso-Pod™ (Anzeige in Inch)
Gewicht
30 kg / 66.1 lb
Anschlüsse
1 x XLR Analog Input
1 x XLR AES/EBU Input
1 x XLR AES/EBU Output
2 x RJ45 Control
S360 SAM™ Studio Monitor
SAM™ Studio Monitor
Technische Spezifikationen
Der S360A bietet hohe Schalldruckpegel, ohne Kompromisse bei der Verlässlichkeit, Sprachverständlichkeit oder Klangqualität einzugehen.
Systemspezifikationen
Frequenzgang
39 Hz - 19 kHz (± 2 dB)
Low cutoff -6dB
36 Hz
High cutoff -6dB
22 kHz
SPL
Peak SPL Maximum peak acoustic output per pair in a listening room with music material at 1 m.
≥128 dB
Kurzzeitiger max. SPL Maximum short term sine wave acoustic output on axis in half space, averaged from 100 Hz to 3 kHz at 1 m.
≥118 dB
Max. Langzeit-SPL Maximum long term RMS acoustic output in the same conditions with IEC weighted noise (limited by driver protection circuit) at 1 m.
≥112 dB
Eigenrauschen
Eigenrauschen Self generated noise level in free space at 1 m on axis (A-weighted).
≤10 dB SPL
Gewicht
Gewicht30 kg (66.1 lb)
Abmessungen
Höhe
530 mm
Höhe mit Iso-Pod
530 mm
Breite
360 mm
Tiefe
360 mm
Gehäuse
Gehäusematerial
MDF
Gehäusetyp
Reflex port
Treiber
Treiber-Typ
Cone
Durchmesser
250 mm
Treiber-Typ
Compression
Compression driver 44 mm (1.7 in) into a 25 mm (1 in) throat.
Durchmesser
25 mm
Richtwirkung
Harmonische Verzerrung
100 Hz...5 kHz ≤0.5 %
> 5 kHz ≤1.5 %
Gruppen-Laufzeit
The latency at high frequencies from the input to the acoustic output, measured in the analog input:
Extended Phase Linearity in GLM set to OFF
5.2 ms
In Genelec performance graphics, the time of converting the from an electronic input signal to the acoustic output in a Genelec monitor is described by two factors – latency and group delay. The group delay factor can be read in the graphics for a specific frequency. The total frequency-specific input-to-output delay is a sum of the latency and group delay factors. To understand the significance of this total delay, consider that moving a loudspeaker away by 1 meter creates an additional delay of about 3 ms.
Abschnitt Verstärker
Verstärker
250 W Class D
100 W Class D
Netzspannung
100-240 VAC 50/60Hz
Stromverbrauch
ISS aktiv
≤1 W
Leerlauf
≤11 W
Volle Leistung
230 W
Abschnitt Signalverarbeitung
Anschlüsse
Input Analog signal input connector XLR female, balanced 10 kOhm.
Input Digital signal input connector XLR female 110 Ohm.
Output Digital signal output / Thru connector XLR male 110 Ohm.
2 x Control Two CAT5 (RJ45) GLM Network connectors for computer control using the Genelec Loudspeaker Manager (GLM) software.